Καλώς ήρθατε στο νέο μας ηλεκτρονικό κατάστημα
|
SKU: 0015063

Dynavector DV XX-2mkII

Low output MC with Flux damper and Alnico magnet.0.30mv output.The DV XX-1 was the first cartridge to feature a "magnetic flux damper" (patent) and softened magnetism" (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance. 

Κατόπιν παραγγελίας - Σύμφωνα με την αποθήκη του προμηθευτή
€1.995,00 Τελική Tιμή
Προσθήκη στο καλάθι
Έχεις απορίες ή θες να κάνεις τηλεφωνική παραγγελία; Καλέστε μας στο 2109401167
Πληκτρολογήστε τον ταχυδρομικό κώδικα της περιοχής σας - ώστε να σας ενημερώσουμε για τους τρόπους αποστολής / παραλαβής.
badge

Υποστήριξη μετά την πώληση

Εγγύηση προμηθευτή έωςέτη

star

Δίπλα σας από το 1976

Πάνω από 46 χρόνια εμπειρίας!

group

Γίνετε μέλος μας

Κερδίστε ειδικές προσφορές

Εναλλακτικές Προτάσεις
Ortofon 2M 78 Verso
SKU: 40351
Κατόπιν παραγγελίας
€149,00
Ortofon 2M Red Verso
SKU: 40352
Κατόπιν παραγγελίας
€125,00
Nagaoka MP-100
SKU: 40482
Κατόπιν παραγγελίας
€135,00
Nagaoka MP-110
SKU: 40483
Κατόπιν παραγγελίας
€164,00
Nagaoka MP-150
SKU: 40484
Κατόπιν παραγγελίας
€385,00
Nagaoka MP-200
SKU: 40485
Κατόπιν παραγγελίας
€489,00
Nagaoka MP-300
SKU: 40490
Κατόπιν παραγγελίας
€780,00
Nagaoka MP-500
SKU: 40492
Κατόπιν παραγγελίας
€940,00
Goldring E1 Moving Magnet Cartridge GL0054
SKU: 42548
Άμεσα Διαθέσιμο
€79,00
Goldring E2 Moving Magnet Cartridge GL0056
SKU: 42549
Άμεσα Διαθέσιμο
€109,00

The The DV XX-2 MKII retains the benefit of the flux damper but features the Alinco-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality.

The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs.

The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages.

For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms.

dimensions
Type

 Low output moving coil cartridge with Alnico magnet and Flux damper

Output Voltage

 0.28mV (at 1KHz, 5cm/sec.)

Channel Separation

 30 dB (at 1KHz)

Channel balance

 1.0 dB (at 1KHz)

Frequency response

 20 - 20,000Hz (± 1dB)

Compliance

 10 x 10-6 cm/dyn

Tracking force

 1.8 - 2.2 grams

Impedance

 R=6 ohms

Recommended load
resistance


 > 30 ohms

Cantilever

 6mm length 0.3 mm dia. solid boron

Stylus

 PF Line contact shape, stylus radius: 7 x 30 micron

Weight

 8.9 grams