OVERVIEW
- Ultra rigid frame for better mechanical stability
- USB connector (MP3) on front panel
- Digital outputs: Optical and Coaxial
- Professional low noise switch mode power supply
- Separate controllers for digital and analog sections
Included Accessories
- 1x Detachable IEC power cord
- 1x Remote control
- 2x Batteries
- 1x Manual
DAC : The interface to the S/PDIF inputs is provided by an AK4432 chip. Maximum sampling is 32 bits at 192 kHz on both coaxial and optical inputs.
Specifications
Level output: 2.0V
Bandwidth :
(ref. 0dB, 20Hz - 20kHz): +0.5dB Total harmonic distortion:
(ref. 1kHz): <0.005%.
Signal to noise ratio (A, ref. 1kHz): 108dB
Balance between channels:
(Ref. 0dB, 1kHz): +0.5dB
Dynamic range: 96dB
Channel separation :
95dB (1kHz - 10kHz)
Supported formats on CD and USB (FAT32) : MP3 up to 320 Kbps
Connectors
1x USB Connector (en façade) 1x Analog Output( RCA)
1x Coaxial Digital Output (RCA) 1x Optical Digital Output
1x Headphone Output (6,35mm jack) 1x USB Connector on rear panel (for firmware updates)
1x IEC Power Plug
Dimensions (LxHxP) : 430x80x356mm
Weight : 5,3Kg
Finishes