Pro-Ject T1 EVO (Ortofon OM 10e) - Piano Black
Το T1 EVO στοχεύει να προσφέρει αληθινό ήχο υψηλής πιστότητας σε προσιτή τιμή. Διαθέτοντας υλικά κορυφαίας ποιότητας, κομψή αισθητική και πλούσιο, ζωντανό ήχο, η εκτεταμένη διαδικασία ανάπτυξης έχει εξασφαλίσει ότι δεν υπήρξε συμβιβασμός στην απόδοση του ήχου κατά την επίτευξη μιας τόσο προσιτής τιμής.
Υποστηρίζουμε αγορές με δόσεις με χρήση χρεωστικής κάρτας. Για λεπτομέρειες καλέστε μας τηλέφωνο
Δωρεαν μεταφορικα σε ολη την Ελλαδα!
Υποστήριξη μετά την πώληση
Εγγύηση προμηθευτή έωςέτη
Δίπλα σας από το 1976
Πάνω από 46 χρόνια εμπειρίας!
Γίνετε μέλος μας
Κερδίστε ειδικές προσφορές
The stylish CNC-machined plinth, available in High Gloss Black, Satin White or Walnut finish, features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis.
Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 EVO from ambient vibrations around your hi-fi system.
Audiophile Design
In the T1 EVO, the motor drives a belt, attached to a new bigger sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing.
Alongside the chosen motor system, the T1 EVO is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across. With its straight, 8.6” effective length and stiff aluminium construction, the one-piece tonearm also features low-friction bearings for absolute accuracy in use.
Besides the clean and stylish looks, the integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells!
Supplied with an Ortofon OM 10 Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.
- Speed: 33, 45 (electronic speed change)
- Principle: Belt drive
- Speed variance: 33: 0.7% 45: 0.6%
- Wow & Flutter: 33: 0.25% 45: 0.23%
- Platter: Heavy 8mm, blasted-glass platter with felt mat
- Main bearing: Stainless steel/brass
- Signal to noise: 65dB
- Tonearm: 8.6” aluminium
- Effective arm length: 218.5 mm
- Overhang: 22.0 mm
- Effective tonearm mass: 8.0 g
- Counterweight for mass: 5 – 10g (pre-mounted)
- Tracking force range: 0 – 50mN (17.5 mN pre-adjusted)
- Outputs: RCA
- Included accessories: dustcover, feltmat, power supply,
- high-quality phono/line RCA cable
- Power Supply: 110 – 240V/50, 60Hz; 15 V DC 800mA
- Power consumption: 4.5 Watt max
- Dimensions: 415x100x335 mm (WxHxD)
- Weight: 3.8 kg net