Hyper Achromatic Tonearm uses an OCC (Ohno Continous Casting) high purity copper conductor with foamed FEP dielectric, combining to offer a sophisticated, evenly balanced sound which draws you into the musical performance.
The cable iis fitted with our Achromatic non-magnetic RCA plugs and spade-terminated earth tags. The low-mass Achromatic connector features a solder-free, cold-weld connection, all optimised to create a coherent, continuous signal path. The signal conductor is a fully shielded high quality OCC copper, designed and constructed to provide maximum resistance to RFI (Radio Frequency Interference) which can add unwanted noise levels in a poorly shielded cable – particularly vital with the very low-level signals typically generated by a pick-up cartridge.
Hyper Achromatic Tonearm uses an OCC (Ohno Continous Casting) high purity copper conductor with foamed FEP dielectric, combining to offer a sophisticated, evenly balanced sound which draws you into the musical performance.
The cable iis fitted with our Achromatic non-magnetic RCA plugs and spade-terminated earth tags. The low-mass Achromatic connector features a solder-free, cold-weld connection, all optimised to create a coherent, continuous signal path. The signal conductor is a fully shielded high quality OCC copper, designed and constructed to provide maximum resistance to RFI (Radio Frequency Interference) which can add unwanted noise levels in a poorly shielded cable – particularly vital with the very low-level signals typically generated by a pick-up cartridge.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
SKU: 51476
Κατόπιν παραγγελίας
€869,00
Ακολουθήστε μας και ενημερωθείτε πρώτοι για τις καλύτερες προσφορές
τα social media μασ
Πολιτική των cookies
Χρησιμοποιούμε cookies για να εξασφαλίσουμε τη σωστή λειτουργία του ιστοτόπου μας και να σας προσφέρουμε την καλύτερη εμπειρία πλοήγησης.
Ρυθμίσεις
Χρησιμοποιούμε δεδομένα μέσω cookies για την σωστή λειτουργία του website , καθώς και πληροφορίες που μας βοηθούν να παρέχουμε το μέγιστο των υπηρεσιών μας, εσείς όμως θα αποφασίσετε για τα δεδομένα αυτά.
Η έλλειψη των cookies αυτής της κατηγορίας επηρεάζει την λειτουργία της ιστοσελίδας σε μεγάλο βαθμό. Χωρίς αυτά, λειτουργίες όπως η σύνδεση, οι ηλεκτρονικές αγορές προϊόντων ή οι online πληρωμές δεν είναι εφικτές.
Τα cookies αυτά αποθηκεύουν ανώνυμες πληροφορίες σχετικά με τη συμπεριφορά των χρηστών κατά την πλοήγησή στην ιστοσελίδα, στατιστικά χρήσης, απόδοσης κλπ. Σκοπός τους είναι η βελτίωση της λειτουργικότητας της ιστοσελίδας & της εμπειρίας σας.
Χρησιμοποιούνται για την επιλογή και την προβολή διαφημίσεων - μόνο δικές μας - προσαρμοσμένων στα ενδιαφέροντα του χρήστη.
