• Λογαριασμός
  • Αγαπημένα
  • Σύγκριση
Αφήστε κριτική
|
SKU: 009531
Adam Sub10 Mk2 - 10inch Sub Adam Sub10 Mk2 - 10inch Sub
Adam Sub10 Mk2 - 10inch Sub
Adam Sub10 Mk2 - 10inch Sub

Adam Sub10 Mk2 - 10inch Sub

brand-logo

ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies. 

Κατόπιν παραγγελίας - Σύμφωνα με την αποθήκη του προμηθευτή
€1.150,00 Τελική Tιμή
Προσθήκη στο καλάθι
Έχεις απορίες ή θες να κάνεις τηλεφωνική παραγγελία; Καλέστε μας στο 2109401167
Buy Now Pay Later με χρήση χρεωστικής κάρτας

Υποστηρίζουμε αγορές με δόσεις με χρήση χρεωστικής κάρτας. Για λεπτομέρειες καλέστε μας τηλέφωνο

Πληκτρολογήστε τον ταχυδρομικό κώδικα της περιοχής σας - ώστε να σας ενημερώσουμε για τους τρόπους αποστολής / παραλαβής.
badge

Υποστήριξη μετά την πώληση

Εγγύηση προμηθευτή έωςέτη

star

Δίπλα σας από το 1976

Πάνω από 46 χρόνια εμπειρίας!

group

Γίνετε μέλος μας

Κερδίστε ειδικές προσφορές

Εναλλακτικές Προτάσεις

All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.

Panel / Controls

All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').

Sub10 Mk2

The Sub10 Mk2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz .

A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.

The Sub10 Mk2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).

Subwoofer 
Number1
Basket Ø10" (260 mm)
Voice coil Ø2" (50 mm)
Cone materialPaper
Built-in Amplifiers 
Subwoofer1
Amp. power RMS / music200 W / 300 W
Input connectors 
AnalogXLR / RCA
General data 
PanelRear
Frequency response25 Hz - 150 Hz
THD > 60 Hz≤1 %
Peak SPL max at 1m≥113 dB
Crossover frequencies50 - 150 Hz
Input impedance10 KOhm
Weight46.3 lb (21 kg)
Height x Width x Depth22" (560 mm) x 12" (300 mm) x 15.5" (400 mm)
Warranty5 Years
Delivery contents

Power cord, Manual